YAESU 897 ALL MODE ( none D version )
Amateur HF/VHF/UHF transceiver
Frequency range: TX: 10-160 m + WARC/6 m/2 m/70 cm
RX: 0.1-56 / 76-108 / 118-164 / 420-470 MHz
Mode: TX: AM/FM/SSB/CW
RX: AM/FM/WFM/SSB/CW
RF Power output: FM/SSB/CW: 100/100/50/20 W
AM: 25/25/12.5/5 W
Sensitivity: SSB/CW (10 dB S/N): 0.2 uV (1.8-30 MHz), 0.125 uV (50-440 MHz)
AM (10 dB S/N): 32 uV (0.1-1.8 MHz), 2 uV (1.8-28 MHz), 1 uV (50-54 MHz)
FM (12 dB SINAD): 0.5 uV (28-30 MHz), 0.2 uV (50-440 MHz)
Selectivity: SSB/CW: 2.2 KHz (-6 dB), 4.5 KHz (-60 dB)
AM: 6 KHz (-6 dB), 20 KHz (-60 dB)
FM: 15 KHz (-6 dB), 30 KHz (-60 dB)
NFM: 9 KHz (-6 dB), 25 KHz (-60 dB)
Optional filters will increase selectivity
Image rejection: 70 dB (HF/6 m), 60 dB (2/70 cm)
Voltage: 13.8 VDC +/- 15%
Current drain: RX: 0.6-1 A
TX: Max 22 A
Impedance: 50 ohms, SO-239 + N
Dimensions (W*H*D): 200*80*262 mm
Weight: 3.9 Kg
Other: 200 memories. 9K6 packet ready.
DSP, DCS, CTCSS, ARTS & RS-232. Beacon function
has been wide banded so transmit out of standard bands
in good condition
comes with standard yaesu mic
and original 897 box
Zetagi TM-535 HF ATU
Zetagi TM-535 HF ATU Top quality ATU for 1.5-30MHz Cross needle meter indicates forward & reflected power and swr simultaneously. Frequency 1.5-30MHz Power scales 50W/500W Size 270 x 210 x 90mm Connectors SO239 + terminals SWR up to 500 watts 4 coax lines including balanced line or external dummy load (dummy load not supplied).
and also a
usb mini pro pc psk 31 / 63 to use with ham radio deluxe and other pc ham radio software
and a 2 meter and 70 cms collinear antenna
ICOM 706 ( MK1 )
Frequency range: TX: 10-160 m + WARC / 50-54 / 144-146 MHz (Europe)
RX: 0.03-200 MHz all-mode incl WFM
Mode: AM/FM/SSB/CW/RTTY
RF Power output: 100/100/10 W
Voltage: 13.8 VDC
Impedance: 50 ohms, SO-239 (HF/6 m), SO-239 (2 m)
Dimensions (W*H*D): 167*58*200 mm
Weight: 2.5 Kg
as far as I know its been wide banded for tx
a few slight marks but generally good condition
in good working order
comes with original box a manual on cd
+
LDG z100 AUTO TUNER AND MATCHING LEAD FOR THE 706 THIS CAND BE CONTROLLED FROM THE 706
•Microprocessor controlled
•High efficiency switched "L" tuning network
•LED indicators for Status and SWR.
•200 fast memories
•Latching relays, holds tune position forever.
•Optimized, low power consumption tuning algorithm
•Tuning time: 0.5 to 6 seconds, 3.0 average
•Current consumption: ◦Idle - Nearly zero amps.
◦Tuning - 300 mA max
•Voltage requirements: 11 to 18 volts (user supplies power source)
•1.8 to 54.0 MHz coverage
•Tunes 6 to 800 ohm loads, 10:1 SWR (3:1 SWR on 6 meters)
•Power range: 0.1 to 125 watts (50 watts on 6 meters)
•For Dipoles, Verticals, Vees, Beams and Coax Fed Antennas
•Optional external Balun allows tuning of random length, long wire or ladder line fed antennas
•Enclosure size: 5.5"D x 5.25"W x 1.5"H
•Weight: 14 oz
ALTHOUGH THIS TUNER CAN BE USED ON ANY HF RADIO UPTO 100 WATTS
I DO NOT WANT TO SEPERATE THEM AS IT COMES WITH A MATCHING LEAD FOR THE ICOM 706 SO CAN BE OPPERATED DIRECTLY FROM THE ICOM
((( swap for a VHF UHF HF ham radio home base or mobile of equal value to all my ham items no really old ones though i'e nothing from the 1980's or early 1990's )))
or £900 the lot bargain price NO OFFERS
leeds west yorkshire
Posted: Thu, 26 Feb. 2015
Expires: Sun, 8 Mar. 2015
First
Prev
Post
Home
