In excellent working condition although lid is a bit tatty. Late ser# 7nnn. Complete with 2.7kHz roofing filter, manual and power cable. Recent VCO and Tx calibration 100%.

£825

Additional options available such as filters, sub rx, gen cov rx, K3S synth available. Please email to discuss.

Can courier or feel free to inspect and collect from Little Gransden (SG19)

terryburbidge56@gmail.com

Posted: Wed, 15 May. 2024
Expires: Sat, 25 May. 2024

I have an Elad FDM Duo in nice condition with everything it came with inc a few power cable options, has the mic, cables and box etc
This is a QPR sdr radio that can be used standalone without a computer, or like a flex type radio with a computer with the free software you can download, brilliant receive, better than the Icom IC7300 i had, the radio is Black
Look on youtube and the web to see how good it is, the radio is NOT widebanded
https://www.hamradio.co.uk/elad-fdm-duo ... er-pd-5447
https://www.eham.net/reviews/view-product?id=11933

Also has latest matching Elad speaker with built in noise reduction (better than BHI but similar), boxed with instructions and looks new, you can power the speaker and the power out goes to the Elad FDM Duo so you only have 1 wire going to the PSU
The speaker is Black, this has 5 filters and is the latest one, a solid well made great sounding speaker
https://www.hamradio.co.uk/elad-compani ... uo-pd-8571
https://www.eham.net/reviews/view-product?id=13734

Also the Elad EXTIO 232 cat interface for connecting to amplifiers or antenna controlers etc, has the bits it came with
I never used it when i had the FDM Duo connected to a RM italy MLA100 linear
https://www.eladit.shop/en-gb/Interfacc ... p209053169

I am after a mint and complete Icom IC7100, must be working 100% pref boxed or £650 no offers
PM info please
Would take a mint yaesu ft991A plus a few quid your way M0TXP Liverpool

Posted: Wed, 15 May. 2024
Expires: Sat, 25 May. 2024

Kenwood TM-V7E 144/430 FM Dual Bander
with 2 Mics, power cable & a bracket

£80 posted

Posted: Wed, 15 May. 2024
Expires: Sat, 25 May. 2024

yes 1kw pluss on hf for not much cash this old lady requires a new home she is a heatherlight amp 2x 3-500
valves she has made way for new toy she requires a little love and attention but would serve you well
she is heavy you would nead to collect pictures avalible old school tec built to last .yours for £650.

de gordon g3pxt qthr norwich

Posted: Wed, 15 May. 2024
Expires: Sat, 25 May. 2024

5e siro 6m beam work the dx on 6m new still in box upgraded before i built it have worked 50 dxcc this year already on 6m join the fun £125 collect or + postage norwich
g3pxt gordon qthr

Posted: Wed, 15 May. 2024
Expires: Sat, 25 May. 2024

roller coaster 2 ae inputs,balenced lines or end fed built in balun. now have stepper no nead for tuner.will handle 3kw no problem asking £400 delivered .
gordon g3pxt qthr norwich

Posted: Wed, 15 May. 2024
Expires: Sat, 25 May. 2024

as title 160/432 mhz all mode lots leads mic etc .
asking £650 delivered signed for or collect qthr
gordon g3pxt norwich

Posted: Wed, 15 May. 2024
Expires: Sat, 25 May. 2024

- Morse Paddle CTHAM IAMBIC £55 free postage
- Morse Paddle WATSON KEYS £55 free postage

priced to sell, posted to UK
any questions feel free to email

Posted: Wed, 15 May. 2024
Expires: Sat, 25 May. 2024

ORIGINAL SMC YAESU FT290R MK1 BATTERY CHARGER

to charge 8x C cells plugs into side of radio £15

Posted: Wed, 15 May. 2024
Expires: Sat, 25 May. 2024

PTT Isolation PCB with screw terminals for easy installation

please see the image file for details

A handy accessory, Designed to provide PTT isolation and protection of auxiliary equipment in your shack

The function of the board is to isolate and protect equipment in your shack. It achieves this in three ways

1 – Ensures no high voltages or other signals can interfere or damage your transceiver's PTT outputs,

2 – Enables you to apply an isolated PTT signal to auxiliary equipment,

3 – Enables you to de-power sensitive equipment when transmitting (I lost several front end devices before using this design).

The unit activates when 0v is applied to any of the PTT inputs (OR function).

The inputs are diode isolated so you can connect up to three separate PTT lines.

All the unit’s switched inputs and outputs are decoupled to earth to avoid stray RF or voltage transients interfering with operation of the unit.

Whilst the relay contacts will switch 16 amps there is a limit to the total current the PCB can carry. I have mitigated this but running the power tracks on both sides of the PCB which allows for up to 7 amps DC. To protect the unit and your equipment I have incorporated a 7-amp PTC fuse in the 12v DC line. If this activates simply remove the fault condition and the fuse will reset.

The unit is designed to work from between 11v to 14v dc (13.8v suggested). The minimum current required to switch the relay is 34 milliamps.

Mounted on insulated M3 stand-offs, Supplied with instructions and schematic

£12.70 including shipping or two for £20

Payment by bank transfer

VY 73 Rex G8UBJ g8ubj.io91uj@gmail.com

Posted: Wed, 15 May. 2024
Expires: Sat, 25 May. 2024

TR7 and matching PSU. Both in GWO.
Radio case has some marks and scratches.
Fitted with 1.8kHz and 500Hz filters.
Also has AUX7 replacement board which uses DIL switches to set the band segments.

Lovely radio, just running out of space.
email for pictures.
£500 ono

No shipping, collect near Aldermaston, Berks. I can deliver within a couple of hours drive for fuel cost.
I'll consider px against K3, FTDX10, FT710 or IC7300

Posted: Wed, 15 May. 2024
Expires: Sat, 25 May. 2024

Digirig Mobile for Yaesu Transceivers
Perfect condition only used to test in the shack, sold my Yaesu 818nd so no longer required
Included in sale
1 x Digirig
2 x Interface cables,
one serial CAT (Mini Din-8) cable and one Audio+PTT (Mini Din-6) cable
coiled cable keeps things nice and tidy by preventing knots and kinks
about 24″ relaxed, 72″ fully stretched
shielded and RF choked with ferrite beads on both ends to prevent RFI
premium quality materials and craftsmanship

Compatible with the following Yaesu Radios
FT-100D, Yaesu FT-100DE, Yaesu FT-100DR, Yaesu FT-1500, Yaesu FT-1500M, Yaesu FT-450, Yaesu FT-450D, Yaesu FT-7100, Yaesu FT-7800, Yaesu FT-7800E, Yaesu FT-7800R, Yaesu FT-7900R, Yaesu FT-8000, Yaesu FT-8000R, Yaesu FT-8100, Yaesu FT-817, Yaesu FT-817ND, Yaesu FT-818, Yaesu FT-818ND, Yaesu FT-840, Yaesu FT-847, Yaesu FT-8500, Yaesu FT-857, Yaesu FT-857D, Yaesu FT-8800, Yaesu FT-8800E, Yaesu FT-8800R, Yaesu FT-8900, Yaesu FT-8900R, Yaesu FT-891, Yaesu FT-897, Yaesu FT-897D, Yaesu FT-950, Yaesu-FT-100
Note: Yaesu FT-891 only uses audio/PTT cable. This transceiver model does not expose the serial interface lines and instead implements serial CAT internally via its own USB connection. See diagram

Price £83.00 including

Posted: Wed, 15 May. 2024
Expires: Sat, 25 May. 2024